Skip to content
EX-403 · Digital Electronics Logic Design/Official Syllabus

Digital Electronics Logic Design (EX-403) - Official Syllabus

1
Unit 1

Number Systems and Codes

  • Digital number systems
  • base conversion
  • Binary
  • Decimal
  • octal
  • Hexadecimal
  • number system with radix r
  • Gray codes
  • Alphanumeric codes – ASCII code and BCD codes
  • concept of parity
  • complementr’s& (r-1)’s
  • subtraction with complements
  • signed Binary numbers
  • Error Detecting & Correcting codes
  • Basic Theorems & Properties of Boolean algebra: AND, OR, NOT operators
  • laws of Boolean algebra
  • Demorgon’s theorem
  • Boolean expression & logic diagram
  • Negative logic
  • Alternate logic gate representation (concept of bubbled gates)
  • canonical and standard Forms (Minterms&Maxterms)
  • sum of minterms& product of maxterms
  • conversion between canonical forms
  • Truth table & maps
  • 2,3,4,5 and 6 variable maps
  • solving digital problems using Maps
  • Don’t care conditions
  • Tabular minimization
  • Sum of product & product of sum reduction
  • Exclusive OR & Exclusive NOR circuits
  • Parity generator &checkers
2
Unit 2

Combinational Circuits

  • Design procedure
  • Adders (half and Full)
  • subtractor (half and full)
  • code convertors
  • Analysis of design
  • Universal building blocks
  • Implementation of any logic circuit with only NAND gates or with only NOR gates
  • Binary serial adder
  • parallel adder
  • serial/parallel adder
  • look ahead carry generator
  • BCD adder
  • Binary multiplier
  • Magnitude comparator
  • Decoder
  • Demultiplexer
  • Encoders
  • priority encoder
  • Multiplexers & implementation of combinational logic diagram
3
Unit 3

Sequential Logic Circuit

  • Latches
  • SR latch with NAND & NOR gates
  • D latch
  • edge triggered flip flop
  • J-K flip flop
  • T flip flop
  • Master slave flip flop
  • Analysis of clocked sequential circuit
  • state table
  • state diagram
  • state reduction state equations
  • state assignments
  • flip flop excitation table & characteristic equations
  • Design procedure for sequential circuits
  • Design with state reduction
  • Applications of flipflop
4
Unit 4

Registers and Counters

  • Asynchronous and Synchronous counter
  • counters with MOD numbers
  • Down counter
  • UP/DOWN counter
  • propagation delay in ripple counter
  • programmable counter
  • Pre- settable counter
  • BCD counter
  • cascading
  • counter applications
  • Decoding in counter
  • Decoding glitches
  • Ring Counter
  • Johnson counter
  • Rotate left & Rotate right counter
  • Registers – Buffer
  • Shift left
  • shift right
  • shift left/Right registers
  • parallel in parallel out
  • serial in serial out
  • parallel in serial out
  • serial in parallel out registers
5
Unit 5

Memory and Data Converters

  • Random Access Memory
  • Timing waveform
  • Memory Decoding
  • Internal Construction
  • Coincident decoding
  • Addressmultiplexing
  • Read only memory – Combinational circuit implementation
  • Type of ROMs
  • combinational PLDs
  • Programmable Logic Array (PLA)
  • Programmable Array Logic (PAL)
  • sequential programmable device
  • Analog todigital conversion – Ramp type
  • dual slope
  • integration
  • successive approximation
  • parallel conversion
  • parallel/ serial conversion
  • convertor specifications
  • Digital to Analog convertors – Binary weighted & R/2R D to A convertors

Laboratory Experiments

  • Verification of all the logicgates.
  • Design of BCD to Excess-3 codeconverter.
  • Implementation of NAND & NOR as Universalgate.
  • Design of RS, JK, T& D Flipflop.
  • Multiplexer /Demultipexer based boolean function
  • Design of combinational circuit forthe (i) Halfadder (ii) Fulladder (iii) Half subtractor (iv) Fullsubtractor
  • Design various A-D & D-Aconvertors.
  • Verify the truth table of SR flip flop
  • Verify BCD to seven segment decoder.

Reference Books

  • Fundamentals of digital circuits — A. Anand Kumar — PHI
  • Digital Electronics — A K Maini — Wiley India
  • Digital Design with standard MSI and LSI — Thomas Blakeslee — Wiley Interscience
  • Modern digital electronics — Jain RP — TMH
  • Digital Logic & Computer design — M Mano — PHI
  • Digital Systems Principle & applications — Tocci — Pearson EducationAsia
  • Digital Electronics — Gothmann — PHI
  • Digital Principles and applications — Malvino, Leech — TMH
  • Digital Fundamentals — Floyad — UBS
  • Logic Design Theory — Nripendra N. Biswas — PHI
  • Digital Electronics — D.C. Green — Pearson EducationAsia
  • Digital Electronics — SubrataGhoshal — Cengage
Go to where you left off?

Quick Add to Notes

Save questions, your own notes and screenshots into notes filed by unit. It takes a free account.

Create free account

Have an account? Log in